Thor Helical Masonry Reinforcement

By
Updated: January 3, 2019

Thor Helical 316 stainless steel bars are highly deformed reinforcement rods that are generally used for stitching cracked walls.

The crack stitching process delivers an effective and durable masonry repair by introducing into the wall fully concealed tension straps, which strengthen fractured masonry and brickwork.

Cracks in house walls aren’t just unsightly; they can be warning signs of structural problems. Cracks in brickwork occur when there is a build-up of stress in the wall. Stress may be caused by normal thermal or moisture movement or by support failure. In either case once the brick block or mortar cracks, the stress is relieved. Following the fracture, the ability of the wall to act as a composite structural unit may be compromised, the wall being unrestrained in cracked zone and vulnerable to further movement.

In order to reconnect the masonry on either side of a crack in a wall it may be strapped or stitched 500mm either side of the crack, at regular intervals to enhance the tensile, shear and flexural capacity of masonry walls. Fractured brickwork should be deeply filled to restore compressive strength and to weatherproof the area.

A series of helical bars are bonded into slots cut across the fracture with WHO-60; a polymer modified and non-shrink thixotropic cement-based grout. The bar forms an excellent bond within the grout by virtue of its continuous deep-trough helix to strap the brickwork on either side of the crack.

For more information on Thor Helical product applications www.thorhelical.com.au